top of page

AMGO 6,000 lb Portable Mid Rise Scissor Lift | MRP06

$1,600.00 Regular Price
$980.00Sale Price

Low-Profile Meets High Productivity. AMGO MRP06 6,000 lb Portable Mid-Rise Scissor Lift

Many shops and home garages struggle with scissor lifts that either sit too high to slide under low-clearance vehicles or take forever to drive on and lift. Wasting precious time and floor space. The AMGO MRP06 Portable Mid Rise Scissor Lift eliminates that headache by combining a low-profile platform with flip-up extension ramps. Drive right onto the integrated non-skid runways. No blocks or extra tools needed. And rise to working height in just 68 s on a standard 110 V circuit. Mid-rise portable scissor lifts give you more lift height than low-rise (~42 inches vs ~24) without committing a permanent bay or requiring full-rise ceiling clearance. That hits the sweet spot for shops that need standing-height service access.

The patented mobile power-unit stand makes the MRP06 truly portable. One tech can wheel it anywhere in the bay, plug in, and lift. High-quality dual cylinders provide 6,000 lb capacity with rock-solid stability, and ETL certification proves it meets stringent North-American safety benchmarks. Portable design with included casters means the lift goes where the work is. The 6,000 lb capacity covers most passenger vehicles, and mid-rise lift travel handles brake, tire, exhaust, and suspension work efficiently.

Flip-up ramps double as extensions for low-chassis vehicles, while 1½″ and 3″ rubber pads protect pinch-welds and frames. A mechanical safety lock with manual release engages at every height, giving you peace of mind on every job. If you need a vehicle lift that balances portability, power, and precision, the MRP06 is your go-to solution. For mobile mechanics, multi-bay shops where lift utilization matters, or DIYers with varied service needs, the MRP06 is sized for the work without forcing a permanent bay commitment.

Need a different lift style? Compare all vehicle scissor lifts, browse the full Car Lifts collection, or see everything from AMGO. Questions? Call (470) 208-2754.

Benefits of the AMGO MRP06 Mid-Rise Scissor Lift

Total MobilityPortable design lets you roll the lift between bays, into a side garage, or out for occasional service work. No permanent install required.Quick Service AccessMid/low-rise lift puts brake and tire work at comfortable working height. No crawling under the vehicle, no jack-stand acrobatics.Saves Floor SpaceCompact platform when raised, and the scissor design folds flat when stored. Easy to tuck against a wall when the bay is needed for other work.Safe and StableMechanical safety locks engage at multiple positions during the lift cycle. Composite rubber pads protect frame finish during contact.Quick SetupPneumatic or electric controls (depending on model) make raise-and-lower operation straightforward. Shop air or 110V plug-in, no commercial wiring.Versatile UseBrake jobs, tire rotations, oil changes, and quick undercar access. The right tool for high-volume quick-service work.

Key Features of the AMGO MRP06 6,000 lb Portable Mid-Rise Scissor Lift You'll Love:

  • 6,000 lb lifting capacity backed by high-quality dual AMGO-engineered cylinders.

  • AMGO ETL-certified power unit for verified safety compliance.

  • Sturdy non-slip platform improves stability and allows quick lifting.

  • Patented power-unit stand design improves mobility — the lift can easily be moved by one person.

  • Both 1½″ and 3″ rubber pads come standard for varied pinch-weld and frame heights.

  • Mechanical lock with integrated manual release engages at every height.

  • Flip-up ramps convert into an extended platform for low-clearance vehicles.

  • Standard extension rubber ramps included (P/N: SX004, 4 units per lift).

Minimum Garage Requirements

Max Lift Height: 41 3/4"✔ Lowered Height: 4 1/8"✔ Platform Dimensions: 57 1/2" L x 77 3/16" W✔ Overall Dimensions (raised): 79 15/16" L x 77 3/16" W x 41 3/4" H✔ Concrete Thickness: Minimum 4" (101.6 mm)✔ Electrical: 1.0 HP, 110 V, single-phase

Max Lift Height: 41 3/4"✔ Lowered Height: 4 1/8"✔ Platform Dimensions: 57 1/2" L x 77 3/16" W✔ Overall Dimensions (raised): 79 15/16" L x 77 3/16" W x 41 3/4" H✔ Concrete Thickness: Minimum 4" (101.6 mm)✔ Electrical: 1.0 HP, 110 V, single-phase

*Concrete must meet the manufacturer's minimum requirements as specified above. Installing this lift on inadequate concrete may result in serious injury or death. It is the customer's responsibility to verify concrete thickness and strength prior to purchase and installation. Stacking taller vehicles vertically may require additional ceiling height. Measure your specific vehicles before ordering. Note: required ceiling clearance equals max lift height plus your vehicle height plus working clearance. Measure your specific vehicles before ordering.

AMGO MRP06 6K Portable Mid-Rise Lift Specifications

Manufacturer

Lifting Capacity

6,000 lbs

Lifting Time

68 s

Lifting Height (A)

41 ¾″

Minimum Height

4 1⁄8″

Maximum Lock Height

40 9⁄16″

Overall Length (B)

79 15⁄16″

Runway Length (C)

57 ½″

Width Between Runways (D)

29 15⁄16″

Outside Edge of Runways (E)

77 3⁄16″

Overall Width (F)

80 5⁄16″

Gross Weight

1,162 lbs

Motor

1.0 HP, 110 V, single-phase

Included Accessories

4× 1 ½″ rubber pads; 4× 3″ rubber pads; 4× SX004 extension rubber ramps

Warranty

Steel Structure (columns, carriages, arms, beams, ramps, etc.): 5 YearsHydraulic Parts (cylinders, seals, hoses, fittings): 3 YearsOther Parts (excl. Consumables), electrical, power units: 2 Years

AMGO MRP06 Frequently Asked Questions

What is a mid-rise scissor lift best for?

The sweet spot between low-rise and full-rise: 41-3/4" of lift puts rocker panels, brakes, exhaust, and underbody seams at seated or kneeling height. Body shops and detailers love mid-rises because the sides of the vehicle stay completely open -- no posts in the way.

Does the MRP06 run on a normal home outlet?

Yes -- the 1.0 HP motor runs on a standard 110V circuit with a 68-second rise. The mobile design rolls where the work is.

Will my truck fit on the MRP06?

The 6,000 lb capacity covers cars, crossovers, and most half-ton trucks. Flip-up ramps and included 1-1/2" and 3" rubber pads adapt to different pinch-weld and frame heights.

Which AMGO scissor lift is right for me?

This MRP06 is the portable 6,000 lb mid-rise. Wheel-height work only? The LR06 costs less. Heavier vehicles at mid-rise? The MRL09 carries 9,000 lbs. Full standing height? The XL-7 rises to 78-3/4".

Do I need to bolt it to the floor?

No -- the MRP06 is free-standing and portable on concrete at least 4" thick. Lower it flat and roll it out of the way when the bay is needed.

Is the AMGO MRP06 worth it?

A portable mid-rise that sets up anywhere, backed by AMGO's 5-year structure / 3-year hydraulics / 2-year electrical warranty. See the Reviews tab above for buyer feedback, and our lift style guide if you're comparing categories.

Ready to upgrade your garage? Talk to a Lift Specialist or explore more options.

Call (470) 208-2754Request a QuoteBrowse All Lifts

    You might also like

    bottom of page